New build – input/comments appreciated

[Boyan Silyavski]

I'll name that tune in 3 switches.!! . . . Lol (Ref to Uk Tv program called name that Tune for those out uk)

You can share the Home and Limit function using just one switch. Place that switch on the moving parts and trigger with a Target and you can bring the switches down 3 + 1 for home if slaved motor.

This is my prefered way has it saves wiring and less switches to go wrong.

Also you can have the Home Zero Position a set distance away from the physical switch trigger point. So if you want Home in the middle of the table you still can. Why you would I don't know but you can if required.

I always forget that. Have to write it down. Again i have bought a ton of switches for my new machine and was just at the point of wiring them.

So you define start and end trigger or you define just one trigger at one end of travel?

Thats sth i don't understand. Have to read again the mach 3 manual obviously.